High Speed CNC Machining Can Lower Your Costs

Our new Makino A51 CNC horizontal machining center is the most advanced Horizontal Machining Center on the market. It features blazing speed, amazing accuracy, and it is one of the few machines that can actually run today’s high tech tooling to its maximum.

It gives us the ability to machine your parts at much faster speeds and with greater accuracy than ever possible before. It can not only save you money, but greatly increase your turnaround time on part manufacturing.

Our High Speed CNC Machining Capabilities:

Maximum X-Axis Travel: 22”
Maximum Y-Axis Travel: 22”
Maximum Z-Axis Travel: 23.6”
► 2 Pallets for Continuous Machining
► Full 4th-Axis Milling Capability
► Rapids at over 2,400 inches per minute
► Tool changes in 1 second
► 14,000 RPM spindle speed
► 25 Horsepower Spindle

Machining times on the Makino A51 compared to the typical CNC vertical machining center:

high speed cnc machining saves money

To find out how High Speed CNC Machining can save you money, call us today for a free quote!

614-539-3000

Share
Advance-CNC-Machining-high-speed-turning-center

CNC Turning Center Expansion

In addition to growing its high speed horizontal CNC machining capacity in 2011, Advance CNC Machining has also expanded its turning capacity with the addition of a Doosan Lynx CNC lathe.

The new CNC Turning Center features high spindle speeds, fast tool changes and a large throat for machining long shafts and tubes.

If you have parts that need machined, please contact Advance CNC Machining at (614) 539-3000 or by email at sales@advanceCNCmachining.com.

 

Share
high speed cnc machining-Makino A51nx

High Speed Machining Capacity Grows

To keep up with demand, Advance CNC Machining has added another high-speed 4-axis horizontal CNC machining center.

high speed cnc machiningThe new machine, a Makino A51nx, was put on the shop floor in the fourth quarter of 2011 because of growing customer requirements.  Since it was installed, this workhorse has averaged nearly 100 hours of production per week.

Some highlights of the new A51nx include tool changes in .9 seconds, 14,0000 RPM spindle speeds, feed rates just under 2,000 inches per minute and a 250 square inch work envelope.

All of these highlights add up to faster cycle times.  That means more parts machined in less time which saves customers money.

If you have parts that you think could benefit from high speed machining, please contact us at (614) 539-3000 or by email at sales@advancecncmachining.com.

Makino A51nx Specs:

Pallet400 x 400mm (15.7″ x 15.7″) 
X560mm (22.0″) 
Y640mm (25.2″) 
Z640mm (25.2″) 
Spindle RPM14,000 rpm 
Rapid Traverse60,000mm/min (2,362ipm) 
Cutting Feedrate50,000mm/min (1,968ipm) 
Maximum WorkpieceØ630mm x 900mm (Ø24.8” x 35.4”) 
Maximum Payload500 kg (1,100 lbs) 
ATC Capacity60 tools (optional 40, 134, 219, 313) 
Tool to Tool0.9 secs 
Chip to Chip2.2 secs 
Maximum Tool Length430mm (16.9”) 
Maximum Tool Diamter170mm (6.7”) 
Maximum Tool Weight12kg (26.4 lbs)

Share

Our New Cincinnati Location

Did you know that our office in Cincinnati has moved?  Did you know we even had a Cincinnati office?

As of April, 2011, our Cincinnati office is now located at 9025 Goldpark Drive in Hamilton.  We’re excited about this location because it gets us closer to many of our customers.

Since we opened an office in Cincinnati in 2009, our active customer list among Cincinnati companies has grown to over forty.  Many of these customers are well-known while some are not.  In either case, we are very fortunate to have the opportunity to provide CNC machining services to them.

Here’s the new contact information:

9025 Goldpark Drive
Hamilton, OH 45011-9764
(513) 889-4545 p
(513) 889-4547 f

[mapsmarker marker=”1″]

Share